Product catalogue
126 products in 7 groups. Filter by group and open a product to see its technical data. Products are at concept stage; the final design is made to your specification.
Ground Support Equipment · Jacking, Support & Levelling 9 products
Aircraft Jacking Systems
Hydraulic jacking systems of 10–100 t capacity for controlled, stable lifting of aircraft during maintenance.
Aircraft Support & Stabilization Systems
Height-adjustable support stands, 800–3000 mm, that hold and stabilise the airframe during maintenance.
Aircraft Levelling Systems
Levelling systems that align aircraft to reference datums within ± 0.05° for calibration, maintenance and measurement.
Aircraft Lifting Systems
Modular systems that lift fuselages, wings and major components synchronously from 4 to 12 points.
Helicopter Ground Support Systems
Modular helicopter maintenance equipment comprising rotor access platforms, fuselage stands and transport trolleys.
Landing Gear Handling Systems
Type-specific equipment for removing, installing and transporting aircraft landing gear.
Axle Jack Systems
Modular hydraulic jack lifting at the landing gear axle for tyre, wheel and brake changes.
UAV/UCAV Maintenance Support Stand
Adjustable stand giving secure support for UAV/UCAV fuselage, wing and payload maintenance.
Modular Maintenance Cradle System
Adjustable modular cradle that securely holds components and sub-assemblies during maintenance.
Ground Support Equipment · Towing & Movement 10 products
Aircraft Towing Systems
Electric or diesel tractors for safe movement of 5–80 t MTOW aircraft in hangar, apron and maintenance areas.
Tow Bar Systems
Tow bars with aircraft-specific heads that provide a secure link between aircraft and tug.
Towbarless Towing Systems
Systems that hydraulically clamp and lift the nose gear to tow aircraft without a tow bar.
Aircraft Tug Systems
Compact electric, hybrid or diesel tugs for moving light and medium aircraft.
Pushback Systems
Pushback systems, remote- or platform-operated, for pushing aircraft back from the stand.
Aircraft Dolly Systems
Low-profile, multi-wheel dollies for short-distance movement of aircraft and components.
Hangar Heavy Load Transfer System
Modular carrier system for controlled, omnidirectional transfer of heavy components inside the hangar.
Apron Transport Trailer
Towable trailer for moving equipment and components between apron and hangar.
Subsystem Maintenance Transport Trolley
ESD-safe trolley for safely moving removed subsystems and LRUs to the maintenance shop.
Container-to-Platform Transfer System
Transfer system for safe, aligned movement of loads and equipment between container and platform.
Ground Support Equipment · Maintenance Platforms & Shelters 5 products
Aircraft Docking Systems
Multi-level modular maintenance docks giving full access to fuselage, tail and wings.
Maintenance Platform Systems
Transportable access platforms with guardrails and anti-slip steps for aircraft maintenance in hangar and field.
Helicopter Maintenance Systems
Lightweight modular access platforms for helicopter fuselage, rotor and subsystem maintenance.
Maintenance Shelter Systems
Climate-controlled maintenance shelters, fixed hangar-type or mobile tent/container, for aircraft and engines.
Mobile Maintenance & Inspection Station
Mobile station equipped with tools and instruments for maintenance, test and inspection in field and hangar.
Ground Support Equipment · Engine & APU 7 products
Engine Transport Systems
Heavy-duty modular stands for shock-isolated, safe transport of aircraft engines.
Engine Installation Systems
Systems for safe engine installation with 6-axis precision positioning and controlled lifting.
Engine Removal Systems
Hoist (bootstrap) and trolley equipment for safe removal and handling of aircraft engines.
Engine Storage Systems
Engine storage stands that protect engines over long periods with anti-corrosion coating and humidity control.
Engine Handling Systems
Modular frame and lift unit systems for lifting, transporting and positioning aircraft engines.
APU Ground Support Systems
Multi-axis, precision-aligned support systems for APU removal, installation and maintenance.
Engine Integration Systems
Test stands and integration fixtures for engine-to-platform integration, testing and certification.
Ground Support Equipment · Hydraulic & Pneumatic Service 6 products
Hydraulic Service Systems
Mobile service units with filtration for filling, flushing and pressurising hydraulic systems.
Hydraulic Filling Systems
Closed-loop, air-free hydraulic fluid filling units that reduce contamination risk.
Hydraulic Cleaning Systems
Mobile high-filtration systems for flushing and cleaning hydraulic components and lines.
Hydraulic Purification Systems
Purification units that remove water, gas and particles from hydraulic fluid so it can be reused.
Hydraulic Pressure Systems
Hydraulic power units with digital pressure and flow control for test and maintenance.
Pneumatic Charging Systems
Charging units for safe pressurisation of tyres, accumulators and pneumatic systems with nitrogen or dry air.
Ground Support Equipment · Fuel, Air & Tire 3 products
Air Supply Systems
Mobile units that produce, dry and distribute compressed air for maintenance and service work.
Tire Service Systems
Mobile service platforms for nitrogen or air tyre inflation, pressure checks and wheel changes.
Refueling Systems
Mobile or fixed refuelling units with filtration and safety features for underwing and overwing fuelling.
Ground Support Equipment · Munitions Support Equipment 5 products
Payload Loading Vehicle
Mobile loader for lifting, transporting and precisely loading payloads and external stores onto aircraft.
Payload Lift Trolley
Modular scissor-lift trolley for precise positioning of payloads.
Payload Handling Rack
Modular rack with integrated hoist for stacking, lifting and transferring heavy payloads.
Missile Transport Systems
Shock-isolated towable trailer for missile field deployment and storage.
Weapon Storage Systems
Modular military cabinet for secure, quick-access storage of weapons and equipment.
Ground Support Equipment · Production Fixtures 3 products
Aircraft Wing Assembly Jig
Metrology-integrated jig for precise positioning of wing spars, ribs and attachment fittings.
Aircraft Fuselage Assembly Jig
Modular jig with access platforms for accurate, repeatable fuselage section assembly.
General-Purpose Interface Support Fixture
Modular fixture supporting components at common interface points for test, assembly and maintenance.
Energetic Area Equipment 15 products
Static Mechanical Transfer Cabinet
Wall-mounted cabinet with a stainless inner chamber and mechanically interlocked double doors for transferring material between areas without personnel crossing.
Pneumatic Drum Lifting and Emptying Machine
Compressed-air drum lifter that clamps, raises and tips the drum into a hopper at a controlled angle, with no electrical supply.
Industrial Cleaning System for Potentially Explosive Atmospheres
Mobile industrial vacuum unit with antistatic hoses and an earthed body for collecting dust and residues in explosive atmospheres.
Electrostatic Grounding and Equipotential Bonding Station
Wall-mounted station that monitors the earth connection of drums, containers and equipment and indicates bonding status with signal lamps.
Explosion Protection and Isolation System
Protection system combining an isolation flap valve and pressure relief panels that stops explosion propagation in ducts and process equipment.
Safety-Interlocked Personnel Access System
Double-door personnel entry cabin that stays locked until the person passes an electrostatic discharge test.
Controlled Ventilation and Filtration Module
Skid-mounted module with a non-sparking fan, staged filters and pressure gauges that extracts and filters air from hazardous areas.
Remotely Monitored Environmental Safety Station
Pole-mounted station that houses gas, dust, temperature and humidity sensors in Ex enclosures and transmits alarms and data for remote monitoring.
Mechanical Machine Guard and Safety Barrier
Fixed guarding system with mesh panels, modular posts and an interlocked door that encloses machines and hazardous zones.
Emergency Safe Shutdown Station
Pedestal control station with latching emergency stop buttons and a signal beacon that brings a plant or line section to a safe state.
Controlled Maintenance Tool Storage Cabinet
Locked, earthed cabinet that stores non-sparking maintenance tools in order and supports tool tracking.
Safe Maintenance Access Platform
Mobile stair platform with guardrails, conductive castors and an earthing cable for safe maintenance access to equipment.
Antistatic Operator Workstation
Workbench with a dissipative work surface, protective shield and earthing points for sensitive and ESD-susceptible operations.
Material Transfer Cart for Hazardous Areas
Shelved hand cart with conductive castors and a drag chain for safe movement of materials and containers in hazardous areas.
Drum Transport Cart for Hazardous Areas
Drum trolley for hazardous areas with a drum clamp, conductive wheels and an earthing drag chain.
Assembly Machines & Fixtures 16 products
Modular Horizontal Assembly Station
Modular assembly station with support carriages on linear rails that holds and aligns long cylindrical bodies on a horizontal axis.
Vertical Assembly Support Station
Assembly station with a turntable and height-adjustable column clamp that holds cylindrical parts upright, with an access stair.
Long-Body Component Assembly Stand
Stand with polyurethane-lined roller saddles and screw height adjustment that supports long-body parts and allows rotation about their axis.
Segment Assembly Support System
Joining system that aligns cylindrical segments on half-ring saddles mounted on rail carriages and brings them together precisely by handwheel.
Motor Module Assembly Support Stand
Handwheel-driven stand with a tilting cradle on an A-frame that holds motor modules at a suitable angle for assembly and inspection.
Wing / Fin Component Assembly Fixture
Repeatable assembly fixture that holds panel-type wing and fin components at an angle using datum pins and clamps.
Aircraft Forward Fuselage Assembly Fixture
Large assembly fixture that carries the fuselage section inside a rotating ring, with access platforms and datums verified by laser tracker.
Electronic Module Integration Station
Workstation with an ESD-protected bench, tilting assembly panel and scissor transfer cart for installing and connecting electronic modules.
Wiring and Connector Workstation
Station with a tilt-adjustable harness board, lighting and tool rail for harness build and connector termination.
Actuator Subsystem Assembly Stand
Assembly stand with an indexing rotary chuck and linear slide that holds actuator bodies and reacts assembly torque.
Final Assembly Work Platform
Modular raised platform with guardrails and stairs providing safe access around large bodies during final assembly.
Mechanical Rotary Assembly Stand
Assembly stand with a worm-driven handwheel and clamping rings that rotates cylindrical parts about their axis and locks them in any position.
Height-Adjustable Assembly Platform
Mobile scissor platform with guardrails and castors that positions the operator at the right height for the assembly task.
Modular Mechanical Assembly Fixture
Assembly fixture with a gridded datum table and interchangeable modular clamping elements that adapts quickly to different parts.
Mechanical Datum Referencing Fixture
Fixture with a granite surface plate, datum bushes and a dial indicator stand that establishes the dimensional reference of parts and fixtures.
Mechanical Support Ring
Two-piece hinged ring with a lined bore that wraps cylindrical bodies and supports them during lifting, handling and assembly.
Lifting & Positioning 16 products
Pneumatic Lifting Platform
Low air-bellows lifting table with a steel top and foot valve control that raises parts to an ergonomic height.
Mechanical Screw Lifting System
Four screw jacks synchronised by a geared motor and line shafts to lift heavy loads in a controlled manner.
Manual Multi-Axis Positioner
Manual positioner with handwheel-driven tilt, rotation and height axes and a round clamping plate.
Pneumatic Balancing Manipulator
Floor-fixed articulated arm with a pneumatic cylinder that balances the load for low-effort part placement.
Heavy Component Rotating Stand
Motorised headstock and tailstock stands that support a heavy part, rotate it about its axis and hold it at a set angle.
Mechanical Tilt and Rotation Platform
Mechanically driven platform that rotates the part 360° on a T-slot table and tilts it between 0 and 90°.
Height-Adjustable Industrial Cradle
Mobile cradle that carries cylindrical parts on two V-blocks, with height set by hand-pumped hydraulic columns.
Custom Lifting Spreader Beam
Project-specific spreader beam with adjustable lifting lugs, locks and slings for balanced multi-point lifting.
Mobile Hydraulic Gantry Lifting System
Mobile gantry with telescopic hydraulic legs and a trolley hoist for heavy lifts where no fixed crane is available.
Battery-Powered Heavy Load Transfer Cart
Low-deck battery cart on polyurethane wheels with pendant control for moving heavy loads without rails.
Hydraulic Scissor Lift Platform
Fixed heavy-duty hydraulic scissor table with a bellows skirt that raises loads to working or loading level.
Die Change and Press Loading Cart
Rail-mounted cart that docks at the press and transfers dies to the bolster via a roller deck and push-pull chain.
Rail-Guided Heavy Load Transfer Cart
Flat-deck cart running on floor rails and powered by a cable reel to carry heavy loads between stations and bays.
Vacuum Sheet and Panel Lifting System
Crane-suspended multi-pad vacuum beam that lifts sheets, plates and composite panels without marking.
Mobile Hydraulic Workshop Crane
Folding mobile workshop crane with a hydraulic hand pump and telescopic boom for lifting and moving parts.
Heavy-Duty Rotary Transfer Table
Slewing-ring table driven by a geared motor that turns heavy loads in place between rail lines or stations.
Test & Verification 15 products
Vibration Test System
Electrodynamic shaker system verifying vibration endurance of avionics and mechanical components under sine, random and shock profiles.
Mechanical Impact and Shock Test System
Drop-type shock test system verifying component and assembly resistance to half-sine, trapezoidal and sawtooth shock pulses.
Structural Static Load Test Bench
Reaction-frame bench applying multi-point hydraulic loads to structural parts and sub-assemblies for strength and deflection checks.
Temperature and Humidity Test Chamber
Climatic chamber verifying component operation and endurance under high and low temperature, humidity and temperature change.
Altitude and Low Pressure Test Chamber
Chamber verifying component operation at flight-altitude low pressure, rapid decompression and combined temperature.
Sand and Dust Resistance Test Chamber
Chamber verifying sealing and abrasion resistance of components and enclosures to blowing dust and sand at controlled speed and density.
Water Ingress Protection Test System
Multi-mode test system verifying water ingress protection of components and enclosures under drip, spray, jet and rain conditions.
Salt Spray Corrosion Test Chamber
Chamber verifying corrosion resistance of coatings, fasteners and components in a controlled neutral salt fog environment.
Valve and Manifold Leak Test Bench
Test bench verifying internal and external leakage of hydraulic and pneumatic valves and manifolds by pressure decay and flow.
Pipe and Hose Hydrostatic Test Bench
Test bench verifying proof pressure and leak tightness of hydraulic and fuel tube and hose assemblies by hydrostatic method.
Electric Actuator Cycle Test System
Servo-loaded test system verifying stroke, speed, current and life cycle performance of electromechanical actuators under load.
Hydraulic Pump Performance Test Bench
Bench verifying flow, pressure, efficiency and steady-state performance of aircraft hydraulic pumps in a motor-driven closed circuit.
Composite Panel Bending Test Bench
Test bench determining three- and four-point flexural strength and stiffness of composite specimens and panels under controlled load.
Aerospace Fastener Torque Test Bench
Automated torque bench measuring tightening torque, clamp load, friction and prevailing torque of aerospace fasteners.
Universal Aircraft Hydraulic Component Test Bench
Multi-purpose bench for functional, pressure and leak testing of aircraft hydraulic components such as actuators, valves, filters and accumulators.
Packaging & Storage 10 products
Side-Opening Heavy-Duty Transport Container
Heavy-duty steel transport container whose full-length side doors allow large and long items to be loaded from the side.
Hermetic Metal Storage Container
Metal container with gasketed doors, pressure gauge and humidity control that stores sensitive equipment in a dry, sealed environment.
Shock and Vibration Isolated Transport Case
Transport case whose internal carrier is isolated from the shell by elastomer mounts, with shock indicators and lifting eyes.
Modular In-Container Cradle System
System of saddles that slide and lock on rails inside a container, securing cylindrical bodies throughout transport.
Container Loading Platform
Platform with a powered conveying surface and operator panel that loads heavy items into and out of containers in a controlled way.
Metal Crate Opening and Closing Station
Gantry-type station that lifts heavy crate lids under control and holds them in the required position.
Long Component Storage Rack
Heavy-duty storage rack with telescopic drawer levels that keeps long components individually accessible.
Automatic Multi-Level Heavy-Duty Storage System
Enclosed automatic storage system that brings trays to the access point by vertical lift and connects to warehouse management software.
Workshop Temporary Storage Stand
Mobile shop-floor stand with shelves, castors and clear curtains that keeps parts protected from dust between operations.
Corrosion-Protected Metal Container
Container with a gasketed lid, humidity indicator and temperature-humidity logger that stores metal parts protected from corrosion.
Material Preparation & Processing 6 products
Metal Washing and Cleaning System
Cleaning system with a basket cabinet, heated tank, pump and filter unit that spray-washes metal parts and dries them with hot air.
2,000-Ton Hydraulic Metal Forming Press
Four-column 2,000-tonne press with proportional hydraulic control and light-curtain protection for deep drawing and forming.
Drying and Feeding System
Process system with an access platform that transfers material under control from the drying unit and feed hopper on the upper deck to the hydraulically driven feeding unit below.
Plug Removal and Installation Fixture
Bench-type fixture with a geared motor drive and bearing-mounted spindle stations for removing and installing plugs at controlled torque, with storage cabinets.
Munition Vessel Cleaning Unit
Mobile cleaning unit with a stainless tank, pump, hose reel and filter set for washing out process vessels.
Hose, Fitting and Tube Bending Pressure Test System
Hydrostatic pressure testing of hoses, fittings and bent tubes with a guarded test chamber, pressure gauges and data recording.
