Concept design. Renders and values are indicative; the final design is made to your specification.
Die Change and Press Loading Cart
Rail-mounted cart that docks at the press and transfers dies to the bolster via a roller deck and push-pull chain.
Key features
- Rail travel, repeatable positioning
- Roller deck for easy die transfer
- Push-pull chain die transfer
- Pin locking to the press bolster
- Corrosion-protected finish, RAL 1021
| Load capacity | 1–30 t |
|---|---|
| Table height adjustment | 700–1200 mm |
| Platform size | 1×1–3×2 m |
| Transfer method | Roller deck and push-pull chain |
| Travel | Electric, on floor rails |
| Positioning | Locking pins to press bolster |
| Safety | Die stops, rail end stops, E-stop |
| Colour | RAL 1021 |
Indicative values; final values are confirmed per project.
Applications
- Sheet forming press die change
- Hydroform and stretch presses
- Moving dies to the tool room
Suitable for
Standards
Options
Other products in this group
Pneumatic Lifting Platform
Low air-bellows lifting table with a steel top and foot valve control that raises parts to an ergonomic height.
Mechanical Screw Lifting System
Four screw jacks synchronised by a geared motor and line shafts to lift heavy loads in a controlled manner.
Manual Multi-Axis Positioner
Manual positioner with handwheel-driven tilt, rotation and height axes and a round clamping plate.
Pneumatic Balancing Manipulator
Floor-fixed articulated arm with a pneumatic cylinder that balances the load for low-effort part placement.
Heavy Component Rotating Stand
Motorised headstock and tailstock stands that support a heavy part, rotate it about its axis and hold it at a set angle.
Mechanical Tilt and Rotation Platform
Mechanically driven platform that rotates the part 360° on a T-slot table and tilts it between 0 and 90°.
Height-Adjustable Industrial Cradle
Mobile cradle that carries cylindrical parts on two V-blocks, with height set by hand-pumped hydraulic columns.
Custom Lifting Spreader Beam
Project-specific spreader beam with adjustable lifting lugs, locks and slings for balanced multi-point lifting.