Concept design. Renders and values are indicative; the final design is made to your specification.
Hose, Fitting and Tube Bending Pressure Test System
Hydrostatic pressure testing of hoses, fittings and bent tubes with a guarded test chamber, pressure gauges and data recording.
Key features
- Guarded test chamber
- Interlocked test start
- Pressure and time recording
- Mobile cabinet
- Corrosion-protected finish, RAL 1021
| Test pressure | 0–700 bar |
|---|---|
| Test medium | Water or hydraulic oil |
| Sample length | ≤ 1.5 m |
| Guarding | Polycarbonate cover, interlocked |
| Recording | Pressure-time curve, report |
| Control | PLC, HMI |
| Colour | RAL 1021 |
Indicative values; final values are confirmed per project.
Applications
- Hose and fitting acceptance test
- Bent tube verification
- Post-maintenance test
Suitable for
Standards
Options
Other products in this group
Metal Washing and Cleaning System
Cleaning system with a basket cabinet, heated tank, pump and filter unit that spray-washes metal parts and dries them with hot air.
2,000-Ton Hydraulic Metal Forming Press
Four-column 2,000-tonne press with proportional hydraulic control and light-curtain protection for deep drawing and forming.
Drying and Feeding System
Process system with an access platform that transfers material under control from the drying unit and feed hopper on the upper deck to the hydraulically driven feeding unit below.
Plug Removal and Installation Fixture
Bench-type fixture with a geared motor drive and bearing-mounted spindle stations for removing and installing plugs at controlled torque, with storage cabinets.
Munition Vessel Cleaning Unit
Mobile cleaning unit with a stainless tank, pump, hose reel and filter set for washing out process vessels.