
Image: Positek
TIPS® X603 Large Angle Tilt Sensor
ATEX / IECEx / UKEX approved tilt sensor; Ex ia IIC T4 Ga, calibrated angle 16° to 160°, IP67.
The X603 TIPS® (Tilt Inductive Position Sensor) is an inductive tilt sensor incorporating the EX07 electronics system, ATEX / IECEx / UKEX approved for use in potentially explosive gas/vapour atmospheres. The output is calibrated to the angle required by the customer. It must be used with a galvanic barrier, such as the Positek X005 amplifier, to meet the product certification. Cable length up to 1 km between sensor and amplifier is possible.
| Measurement range | 16° ile 160° arası (fabrika ayarlı) |
|---|---|
| Intrinsic safety | Ex II 1G; Ex ia IIC T4 Ga (Ta = -40 °C ile 80 °C) |
| Approvals | ATEX / IECEx / UKEX |
| Linearity / hysteresis | < ±0,25° (100°'ye kadar, birleşik hata) |
| Response time | 250 ms (20 °C, tipik) |
| Sensor input parameters | Ui: 11,4 V, Ii: 0,20 A, Pi: 0,51 W |
| Operating temperature | -20 °C ile +80 °C |
| Protection class | IP67 |
| Connection | 4 pin M12 konnektör |
| EMC | EN 61000-6-2, EN 61000-6-3 |
| MTBF | 350 000 h (40 °C, Gf) |
Applications
- Explosive gas/vapour atmospheres (Zones 0–2)
- Tilt monitoring in hazardous areas
- OEM applications
Datasheet (manufacturer page) ↗Manufacturer / supplier page ↗
Other products in this group

P101 Stand Alone Linear Position Sensor
Non-contact inductive linear sensor; 0–5 mm to 0–800 mm stroke, stainless steel body, IP65/IP67 sealing.

P100 Cylinder Linear Position Sensor
Inductive linear sensor for hydraulic and pneumatic cylinders; 350 bar hydraulic pressure, stroke up to 0–800 mm.

P500 Rotary Position Sensor
Non-contact inductive rotary sensor; calibrated angle 16° to 160°, stainless steel body and shaft, IP65/IP67.

P509 Dual Redundancy Rotary Position Sensor
Two independent sensing channels on a common shaft; calibrated angle up to 160°, IP67 sealing.
Product images belong to their respective manufacturers. Prices and stock are not shown; availability is confirmed at quotation.