
Image: Positek
P500 Rotary Position Sensor
Non-contact inductive rotary sensor; calibrated angle 16° to 160°, stainless steel body and shaft, IP65/IP67.
The P500 is an inductive rotary position sensor for industrial and scientific feedback applications. The output is calibrated to the angle required by the customer, between 16° and 160°. The input shaft has full 360° rotational freedom and a machined registration mark identifies the calibrated mid point. Flange or servo mounting options are available.
| Measurement range | 16° ile 160° arası (fabrika ayarlı) |
|---|---|
| Independent linearity | ≤ ±0,25 % FSO (100°'ye kadar), 20 °C |
| Resolution | Sonsuz (infinite) |
| Noise | < 0,02 % FSO |
| Frequency response | > 10 kHz (-3 dB); > 300 Hz (2 telli 4–20 mA) |
| Torque | < 20 mNm (statik) |
| Output options | 0,5–4,5 V (ratiometrik), ±5 V, 0,5–9,5 V, ±10 V, 0,5–4,5 V (24 V besleme), 4–20 mA (2 veya 3 telli) |
| Shaft | 15 mm, Ø 6 mm |
| Body diameter | 35 mm |
| Operating temperature | -40 °C ile +125 °C (standart); -20 °C ile +85 °C (buffered) |
| Protection class | IP65 / IP67 (konnektör / kablo seçeneğine bağlı) |
| EMC | EN 61000-6-2, EN 61000-6-3 |
| MTBF | 350 000 h (40 °C, Gf) |
Applications
- Industrial machinery
- Scientific applications
- OEM angle feedback
Datasheet (manufacturer page) ↗Manufacturer / supplier page ↗
Other products in this group

P101 Stand Alone Linear Position Sensor
Non-contact inductive linear sensor; 0–5 mm to 0–800 mm stroke, stainless steel body, IP65/IP67 sealing.

P100 Cylinder Linear Position Sensor
Inductive linear sensor for hydraulic and pneumatic cylinders; 350 bar hydraulic pressure, stroke up to 0–800 mm.

P509 Dual Redundancy Rotary Position Sensor
Two independent sensing channels on a common shaft; calibrated angle up to 160°, IP67 sealing.

P603 Large Angle Tilt Sensor
Inductive tilt sensor; calibrated angle 15° to 160°, M12 connector, IP67.
Product images belong to their respective manufacturers. Prices and stock are not shown; availability is confirmed at quotation.