
Image: Positek
P509 Dual Redundancy Rotary Position Sensor
Two independent sensing channels on a common shaft; calibrated angle up to 160°, IP67 sealing.
The P509 is a dual redundancy inductive rotary sensor providing two independent position measurements in a single unit. The two sensing channels share a common shaft and operate with separate electronics. If one channel develops a fault, the other can continue to provide position feedback. It suits systems requiring redundancy and installations where sensor replacement is difficult.
| Measurement range | 0–10° (±5°) ile 0–160° (±80°) arası (fabrika ayarlı) |
|---|---|
| Independent linearity | ≤ ±0,25 % FSO (100°'ye kadar), 20 °C |
| Resolution | Sonsuz (infinite) |
| Noise | < 0,02 % FSO |
| Torque | < 50 mNm (statik) |
| Output options | 0,5–4,5 V (ratiometrik), ±5 V, 0,5–9,5 V, ±10 V, 0,5–4,5 V (24 V besleme), 4–20 mA (2 veya 3 telli) |
| Body diameter | 38 mm |
| Operating temperature | -40 °C ile +125 °C (standart); -20 °C ile +85 °C (buffered) |
| Protection class | IP67 |
| EMC | EN 61000-6-2, EN 61000-6-3 |
| MTBF | 350 000 h (40 °C, Gf) |
Applications
- Safety-critical equipment
- Mobile and off-highway machinery
- Difficult-to-access installations
- Industrial automation
Datasheet (manufacturer page) ↗Manufacturer / supplier page ↗
Other products in this group

P101 Stand Alone Linear Position Sensor
Non-contact inductive linear sensor; 0–5 mm to 0–800 mm stroke, stainless steel body, IP65/IP67 sealing.

P100 Cylinder Linear Position Sensor
Inductive linear sensor for hydraulic and pneumatic cylinders; 350 bar hydraulic pressure, stroke up to 0–800 mm.

P500 Rotary Position Sensor
Non-contact inductive rotary sensor; calibrated angle 16° to 160°, stainless steel body and shaft, IP65/IP67.

P603 Large Angle Tilt Sensor
Inductive tilt sensor; calibrated angle 15° to 160°, M12 connector, IP67.
Product images belong to their respective manufacturers. Prices and stock are not shown; availability is confirmed at quotation.