
Image: Positek
P100 Cylinder Linear Position Sensor
Inductive linear sensor for hydraulic and pneumatic cylinders; 350 bar hydraulic pressure, stroke up to 0–800 mm.
The P100 is an inductive linear sensor designed for position feedback in hydraulic and pneumatic cylinders. It has a stainless steel body and the probe coil is encased in a fluoropolymer sheath. The target tube can be stainless steel or aluminium. Stroke is factory set between 0–5 mm and 0–800 mm.
| Measurement range | 0–5 mm ile 0–800 mm arası (fabrika ayarlı) |
|---|---|
| Hydraulic pressure | 350 bar |
| Independent linearity | ≤ ±0,25 % FSO (450 mm'ye kadar), ≤ ±0,5 % FSO (450 mm üzeri), 20 °C |
| Resolution | Sonsuz (infinite) |
| Noise | < 0,02 % FSO |
| Frequency response | > 10 kHz (-3 dB); > 300 Hz (2 telli 4–20 mA) |
| Output options | 0,5–4,5 V (ratiometrik), ±5 V, 0,5–9,5 V, ±10 V, 0,5–4,5 V (24 V besleme), 4–20 mA (2 veya 3 telli) |
| Mounting thread | M20 x 1,5; 3/4-16 UNF; M18 x 1,5 |
| Operating temperature | -40 °C ile +125 °C (standart); -20 °C ile +85 °C (buffered) |
| Protection class | IP65 / IP67 (konnektör / kablo seçeneğine bağlı) |
| EMC | EN 61000-6-2, EN 61000-6-3 |
| MTBF | 350 000 h (40 °C, Gf) |
Applications
- Hydraulic cylinders
- Pneumatic cylinders
- Industrial machinery
Datasheet (manufacturer page) ↗Manufacturer / supplier page ↗
Other products in this group

P101 Stand Alone Linear Position Sensor
Non-contact inductive linear sensor; 0–5 mm to 0–800 mm stroke, stainless steel body, IP65/IP67 sealing.

P500 Rotary Position Sensor
Non-contact inductive rotary sensor; calibrated angle 16° to 160°, stainless steel body and shaft, IP65/IP67.

P509 Dual Redundancy Rotary Position Sensor
Two independent sensing channels on a common shaft; calibrated angle up to 160°, IP67 sealing.

P603 Large Angle Tilt Sensor
Inductive tilt sensor; calibrated angle 15° to 160°, M12 connector, IP67.
Product images belong to their respective manufacturers. Prices and stock are not shown; availability is confirmed at quotation.