
Image: Positek
X005 ATEX Approved Galvanic Isolation Amplifier
ATEX / IECEx / UKEX approved amplifier for Positek intrinsically safe sensors; 2.5 kV isolation, 4.7 kHz bandwidth.
The X005 is a galvanic isolation amplifier designed for Positek intrinsically safe position sensors; it can also be used with suitable potentiometer based sensors. It provides tri-port isolation between the supply, the hazardous area and the output. It operates in three or five wire mode and compensates up to 15 Ω conductor resistance. The output is factory configured to 0.5–9.5 V or 4–20 mA.
| Intrinsic safety | Ex II (1)GD [Ex ia Ga] IIC, [Ex ia Da] IIIC; Ex I (M1) [Ex ia Ma] I (-20 °C ≤ Ta ≤ +60 °C) |
|---|---|
| Approvals | ATEX, IECEx, UKEX |
| Supply voltage | 24 V DC nominal (12–30 V) |
| Output options | 0,5–9,5 V; 9,5–0,5 V; 4–20 mA; 20–4 mA |
| Bandwidth | DC – 4,7 kHz (-3 dB) |
| Non-linearity | < ±0,1 % FS |
| Isolation | 2500 V (güvenli alan – tehlikeli alan klemensleri) |
| Sensor supply | 5 V, maks. 15 mA |
| Operating temperature | -20 °C ile +60 °C |
| Protection class | IP20 |
| Mounting | 35 x 7,5 mm IEC/EN 60715 DIN (top-hat) ray |
| Dimensions | 97,3 x 22,5 x 111,9 mm |
Applications
- Intrinsically safe sensor circuits
- Hazardous to safe area signal isolation
- Servo control loops
Datasheet (manufacturer page) ↗Manufacturer / supplier page ↗
Other products in this group

P101 Stand Alone Linear Position Sensor
Non-contact inductive linear sensor; 0–5 mm to 0–800 mm stroke, stainless steel body, IP65/IP67 sealing.

P100 Cylinder Linear Position Sensor
Inductive linear sensor for hydraulic and pneumatic cylinders; 350 bar hydraulic pressure, stroke up to 0–800 mm.

P500 Rotary Position Sensor
Non-contact inductive rotary sensor; calibrated angle 16° to 160°, stainless steel body and shaft, IP65/IP67.

P509 Dual Redundancy Rotary Position Sensor
Two independent sensing channels on a common shaft; calibrated angle up to 160°, IP67 sealing.
Product images belong to their respective manufacturers. Prices and stock are not shown; availability is confirmed at quotation.