
Image: Positek
S520 Submersible Large Angle Rotary Sensor
Pressure balanced submersible rotary sensor for use to 350 bar; 316 stainless steel body, calibrated angle 15° to 160°.
The S520 is an inductive rotary sensor designed for arduous underwater applications such as ROVs. Its pressure balanced design allows underwater use to 350 bar. The body and shaft are 316 stainless steel. Electrical connection is via a 4-pin wet mate connector.
| Measurement range | 0–16° (±8°) ile 0–160° (±80°) arası (fabrika ayarlı) |
|---|---|
| Sealing | IP68, 350 bar |
| Independent linearity | ≤ ±0,25 % FSO (100°'ye kadar), 20 °C |
| Pressure effects | Basınçla çıkış değişimi < 1° |
| Torque | < 20 mNm (statik) |
| Output options | 0,5–4,5 V (ratiometrik), ±5 V, 0,5–9,5 V, ±10 V, 0,5–4,5 V (24 V besleme), 4–20 mA (2 veya 3 telli) |
| Connection | Radyal IP68 350 bar wet mate 4 pin MC BH-4-M konnektör |
| Body / flange diameter | 60 mm / 92 mm |
| Operating temperature | -4 °C ile +50 °C (buzlanmasız) |
| EMC | EN 61000-6-2, EN 61000-6-3 |
| MTBF | 350 000 h (40 °C, Gf) |
Applications
- ROVs (remotely operated vehicles)
- Subsea and offshore equipment
- Marine applications
Datasheet (manufacturer page) ↗Manufacturer / supplier page ↗
Other products in this group

P101 Stand Alone Linear Position Sensor
Non-contact inductive linear sensor; 0–5 mm to 0–800 mm stroke, stainless steel body, IP65/IP67 sealing.

P100 Cylinder Linear Position Sensor
Inductive linear sensor for hydraulic and pneumatic cylinders; 350 bar hydraulic pressure, stroke up to 0–800 mm.

P500 Rotary Position Sensor
Non-contact inductive rotary sensor; calibrated angle 16° to 160°, stainless steel body and shaft, IP65/IP67.

P509 Dual Redundancy Rotary Position Sensor
Two independent sensing channels on a common shaft; calibrated angle up to 160°, IP67 sealing.
Product images belong to their respective manufacturers. Prices and stock are not shown; availability is confirmed at quotation.