
Image: Positek
S114 Submersible Stand Alone Linear Position Sensor
Submersible linear sensor derived from the P101; IP68 10 bar / IP69K, stroke up to 0–800 mm, stainless steel.
The S114 is a stand-alone linear position sensor derived from the P101, designed to be completely submerged during normal operation. It is suitable for submersion up to a pressure of 10 bar. Stroke is factory set between 0–5 mm and 0–800 mm. The body and push rod are stainless steel.
| Measurement range | 0–5 mm ile 0–800 mm arası (fabrika ayarlı) |
|---|---|
| Protection class | IP68 10 bar / IP69K |
| Independent linearity | ≤ ±0,25 % FSO (450 mm'ye kadar), ≤ ±0,5 % FSO (450 mm üzeri), 20 °C |
| Resolution | Sonsuz (infinite) |
| Noise | < 0,02 % FSO |
| Frequency response | > 10 kHz (-3 dB); > 300 Hz (2 telli 4–20 mA) |
| Output options | 0,5–4,5 V (ratiometrik), ±5 V, 0,5–9,5 V, ±10 V, 0,5–4,5 V (24 V besleme), 4–20 mA (2 veya 3 telli) |
| Operating temperature | -40 °C ile +125 °C (standart); -20 °C ile +85 °C (buffered), buzlanmasız |
| Body diameter | 35 mm |
| EMC | EN 61000-6-2, EN 61000-6-3 |
| MTBF | 350 000 h (40 °C, Gf) |
Applications
- Marine and offshore equipment
- Submerged systems
- Underwater position feedback
Datasheet (manufacturer page) ↗Manufacturer / supplier page ↗
Other products in this group

P101 Stand Alone Linear Position Sensor
Non-contact inductive linear sensor; 0–5 mm to 0–800 mm stroke, stainless steel body, IP65/IP67 sealing.

P100 Cylinder Linear Position Sensor
Inductive linear sensor for hydraulic and pneumatic cylinders; 350 bar hydraulic pressure, stroke up to 0–800 mm.

P500 Rotary Position Sensor
Non-contact inductive rotary sensor; calibrated angle 16° to 160°, stainless steel body and shaft, IP65/IP67.

P509 Dual Redundancy Rotary Position Sensor
Two independent sensing channels on a common shaft; calibrated angle up to 160°, IP67 sealing.
Product images belong to their respective manufacturers. Prices and stock are not shown; availability is confirmed at quotation.