
Image: Positek
M101 Stand Alone Linear Position Sensor
ATEX / IECEx / UKEX approved linear sensor for gas, dust and mining environments; Ex I/II M1/GD, IP67.
The M101 is a stand-alone linear position sensor incorporating the EX07 electronics system, ATEX / IECEx / UKEX approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments. Under Groups I and II it is suitable for all areas including mining. Stroke is factory set between 0–5 mm and 0–800 mm. It is used with a galvanic isolation amplifier (X005).
| Measurement range | 0–5 mm ile 0–800 mm arası (fabrika ayarlı) |
|---|---|
| Intrinsic safety | Ex I/II M1/GD; Ex ia IIC T4 Ga; Ex ia IIIC T135°C Da; Ex ia I Ma (Ta = -40 °C ile 80 °C) |
| Approvals | ATEX / IECEx / UKEX |
| Independent linearity | ≤ ±0,25 % FSO (450 mm'ye kadar), ≤ ±0,5 % FSO (450 mm üzeri), 20 °C |
| Sensor input parameters | Ui: 11,4 V, Ii: 0,20 A, Pi: 0,51 W |
| Frequency response | > 10 kHz (-3 dB) |
| Operating temperature | -40 °C ile +80 °C |
| Protection class | IP67 |
| EMC | EN 61000-6-2, EN 61000-6-3 |
| MTBF | 350 000 h (40 °C, Gf) |
Applications
- Mining equipment
- Explosive gas and dust atmospheres
- Position feedback in hazardous areas
Datasheet (manufacturer page) ↗Manufacturer / supplier page ↗
Other products in this group

P101 Stand Alone Linear Position Sensor
Non-contact inductive linear sensor; 0–5 mm to 0–800 mm stroke, stainless steel body, IP65/IP67 sealing.

P100 Cylinder Linear Position Sensor
Inductive linear sensor for hydraulic and pneumatic cylinders; 350 bar hydraulic pressure, stroke up to 0–800 mm.

P500 Rotary Position Sensor
Non-contact inductive rotary sensor; calibrated angle 16° to 160°, stainless steel body and shaft, IP65/IP67.

P509 Dual Redundancy Rotary Position Sensor
Two independent sensing channels on a common shaft; calibrated angle up to 160°, IP67 sealing.
Product images belong to their respective manufacturers. Prices and stock are not shown; availability is confirmed at quotation.