
RAMSA Defence
Tee, bulkhead, internal thread on run
Flareless fittings (24° cone) · MS21911 · AS21911
Hydraulics and pneumatics / Aerospace fittings / Flareless fittings (24° cone) / Tee, bulkhead, internal thread on run
Flareless fittings (24° cone)
Tee, bulkhead, internal thread on run
Standard part numbers: MS21911 · AS21911
Working pressureUp to 10,000 psi
ThreadUNF · UNJF · UNJS · UNEF
ManufactureTo standard or custom design

Sizes
Choose a size in the table to request a quote directly. For sizes not listed and custom designs, send your drawing.
| Size (dash) | Tube OD | Thread | |
|---|---|---|---|
| -02 | 1/8 in · 3.175 mm | 5/16-24 | Quote |
| -03 | 3/16 in · 4.762 mm | 3/8-24 | Quote |
| -04 | 1/4 in · 6.35 mm | 7/16-20 | Quote |
| -05 | 5/16 in · 7.938 mm | 1/2-20 | Quote |
| -06 | 3/8 in · 9.525 mm | 9/16-18 | Quote |
| -08 | 1/2 in · 12.7 mm | 3/4-16 | Quote |
| -10 | 5/8 in · 15.875 mm | 7/8-14 | Quote |
| -12 | 3/4 in · 19.05 mm | 1-1/16-12 | Quote |
| -16 | 1 in · 25.4 mm | 1-5/16-12 | Quote |
| -20 | 1-1/4 in · 31.75 mm | 1-5/8-12 | Quote |
| -24 | 1-1/2 in · 38.1 mm | 1-7/8-12 | Quote |
| -28 | 1-3/4 in · 44.45 mm | 2-1/4-12 | Quote |
| -32 | 2 in · 50.8 mm | 2-1/2-12 | Quote |
Materials we can manufacture
Aluminium2024, 6061, 7075
Stainless steel (CRES)304, 316, 21-6-9
Precipitation-hardening stainless17-4 PH, 15-5 PH
Nickel superalloy (Inconel)625, 718
TitaniumTi-6Al-4V (Grade 5)
Low-alloy steel4130
Uses in defence and aerospace
- Internal-thread port on run
- Military aircraft/helicopter main hydraulic pressure/return lines (3,000 psi class)
- Next-gen 5,000/5,080 psi hydraulics (EN 6123, AS4444)
- Fuel and pneumatic lines; landing gear and flight control actuator feeds (boss adapters AS21915, universal elbows AS21925/26)
