
Image: Algodue Elettronica
MFC140-UI Flexible Rogowski Coil
Flexible Rogowski current transducer with 7 mm cross section, IP68, 600 V CAT IV.
MFC140-UI is a flexible current transducer with 7 mm cross section based on the Rogowski principle. It is shielded against external magnetic fields. It is offered in 15 … 50 cm coil lengths and measures up to 5000 A depending on coil length. Accuracy is Class 0.5-A1 according to IEC 61869-10; ANSI/CAN/UL 2808 is listed on the product page.
| Coil length | 15 … 50 cm |
|---|---|
| Cord diameter | 7,2 ±0,2 mm |
| Nominal output rate | 120 mV / kA @ 60 Hz; 100 mV / kA @ 50 Hz (RMS) |
| Max measurable current | 600 A (15…28 cm), 2500 A (29…41 cm), 5000 A (42…50 cm) |
| Accuracy | Class 0,5-A1, IEC 61869-10 |
| Maximum primary voltage | 600 V CAT IV |
| Insulation test voltage | 7400 VRMS / 5 s |
| Connection cable | 3 x 24 AWG ekranlı, 3 m (5, 7, 10, 15 m talebe göre) |
| Protection degree | IP68 |
| Operating temperature | -35 … +75 °C (2500 A'e kadar); -35 … +60 °C (5000 A'e kadar) |
| Standards | ANSI/CAN/UL 2808, CSA C22.2 NO. 61010-1-12, IEC 61010-2-032, IEC 61010-1 Ed3, IEC 60529, IEC 61869-10 |
Applications
- Current measurement in tight spaces
- Current sensing for metering devices
- Retrofit applications
Datasheet (manufacturer page) ↗Manufacturer / supplier page ↗
Other products in this group

UEM45-2 Single-Phase MID Energy Meter
Single-phase 1 DIN module MID Class B energy meter for direct connection up to 45 A.

UEM80-4D E Three-Phase MID Energy Meter
Three-phase MID energy meter for direct connection up to 80 A with built-in Ethernet and web server.

UEM100 Three-Phase MID Energy Meter
Three-phase MID energy meter for direct connection up to 100 A per phase, rated for operation up to 70 °C.

UEMCT Three-Phase MID Energy Meter for CTs
Three-phase MID Class C energy meter for indirect measurement via 1/5 A CTs.
Product images belong to their respective manufacturers. Prices and stock are not shown; availability is confirmed at quotation.